Rotor Shaft Log Debarker
- Rotor shaft log debarker uses open bin, can feed from one end, the other end of the production line operation, to overcome the existing drum barker power outage feeding, discharging, segmented working mode shortcomings, high efficiency.
- Due to the impact of the teeth on the wood segment, the wood segment not only circulates in the housing, but also rotates around itself, so the peeling efficiency is high. It also has a better stripping rate for frozen wood, dry wood and hard-to-peel tree species.
- Strong adaptability to wood, rotor shaft log debarker can be different tree species, diameter, length and shape of the wood segment for peeling, because the wood segment do rotary movement and irregular beating, so the concave bend of the wood segment can also be in good contact with the peeling teeth. Therefore, the stripping rate of curved logs is much higher than that of other drum types.
What is Rotor Shaft Log Debarker?
Rotor shaft log debarker uses the force generated by a rotor with peeling teeth or a peeling roll. After the wood is put into the roll groove or bin, the you can start the machine, and the wood runs in the groove with the machine, and there is constant friction, collision and extrusion between the bark teeth, the bin and other woods, so that the bark is quickly separated.
| Model | SHBP6000 | SHBP9000 |
| Capacity Ton/Hour | 5-10 | 10-15 |
| Motor Power | 37KW | 45KW |
| Log Diameter | 15-320mm | 15-320mm |
| Debarking Rate | 98% | 98% |
| Max Log Length | 6000mm | 9000mm |
| Weight | 4000kg | 5000kg |
Strong adaptability
It can peel wood segments and logs of different species, diameters, lengths and shapes, such as eucalyptus, poplar, oak, elm, etc., and also has a good peeling effect on frozen and curved wood.
High peeling efficiency
The use of line type operation, continuous feeding and discharging, overcoming the drum type peeling machine feed and discharging need to stop the shortcomings. Due to the impact of the teeth on the wood segment, the wood segment is cycled in the housing and turned around itself, and the peeling efficiency is greatly improved, and the stripping rate can reach 98%.
Low energy consumption, low noise
The huge shell is fixed, compared with the roller peeling machine, low energy consumption, vibration and noise.
Simple maintenance
Simple structure, strong rigidity, low failure rate, small maintenance workload.
It has 2 blades.
6000mm
The debarker rate can reach 98%