Automatic Stringer Type Wood Pallet Nailing Machine
- With 15-inch touch screen, you can set the position and number of nails in the touch screen of the automatic stringer type wood pallet nailing machine of Sawmill-World , and adjust the nail speed. It can remotely monitor and troubleshoot faults, and remotely upgrade programs for life.
- PLC of the automatic stringer type wood pallet nailing machine of Sawmill-World is Siemens, nail gun is Bostitch in the United States, Solenoid valve and cylinder is Taiwan Air TAC, electrical components is Chint
- The American MAC high-speed solenoid valve is used to control the reaction speed of the nail gun.
- One-person operation, automatic nailing, automatic palletizing, automatic transmission
- Aviation quick plug for easy wiring.
- There are many types of wooden pallets that can be made, such as flying wing pallets, solid wood pallets, and plywood pallets
- Wooden pallets with 3 or 4 beams can be made. 4 beams switch 3 beams is simple, loosen the top and bottom 4 screws, move the nail gun to the side, and remove the air pipe on the nail gun.
- The pallet size can be customized, and the beam length cannot exceed 1300mm, otherwise the container will not fit.
- The machine is sprayed with plastic, which is not easy to rust.
- Hydraulic stacking of automatic stringer type wood pallet nailing machine of Sawmill-World is more powerful.
What is Automatic Stringer Type Wood Pallet Nailing Machine?
Automatic Stringer type wood pallet nailing machine is one of the representative pallet equipment of Sawmill-World.Pneumatic or hydraulic power is used. Taking pneumatic as an example, the compressed air provided by the air compressor drives the piston movement of the nail gun, produces a strong impact force, and nails quickly into the wood. The hydraulic type uses the pressure transmission of hydraulic oil to promote the relevant parts to achieve the nailing action.
| odel | AWPN-1300 |
| Wood pallet length | 600-1300mm |
| Wood pallet width | 800-1300mm |
| Voltage and power | 220V/ 2kw Servo motor |
| Air Pressure | 0.8MPA |
| Tank size | 0.2 cubic |
| Nail Guns | 4pcs |
| Nail Gun Speed | 7 Times/Second |
| Production Capacity | 40-60 Pallets/Hour |
| Operation Mode | Touch Screen control |
| Apply a nail | Less than 90mm |
| Weight | 2000kgs |
High degree of automation
Equipped with automatic feeding and automatic stacking device, can realize the whole process automation from the wood to the pallet stacking after the completion of nailing, such as the use of PLC control system with sensors, can accurately control the action of each link.
Easy operation
With an intuitive touch screen operation interface, the operator only needs to input parameters on the screen, select the operation mode, etc., you can easily complete a variety of operations, and has automatic fault diagnosis and prompt functions.
Fast nail speed
The nail gun speed can usually reach 7 times/second, which can effectively improve production efficiency, and can produce 1-2 pallets per minute.
300-400 pieces, 8 hours of work per day
The pallet size can be customized, the width does not exceed 1500mm.
3 Bostitch nail guns are standard.